Please note: All prices include GST and are subject to change without notice. Delivery prices are the same for Brisbane, Sydney & Melbourne ports.

Kerdic has a range of discounted stock models available as well as standard models. They are discounted primarily because they are residual slightly older stock built for continuity of work purposes, for the factory between larger commercial multiple orders. They are built to pass the Australian National building code, Australian Electrical code and the Australian Plumbing code only. Kerdic doesn’t produce new models every year but our models are consistently evolving. For example, our current discounted stock needs to be installed 600mm off the ground, this is for the plumbing wastes to have sufficient fall and also the necessity of access that comes with it.

For all the standard/normal priced models the waste plumbing pipes are contained within the floor of the modular, so you don’t have to allow for waste pipe fall or access underneath. This allows for stacking the modular one on top of the other for unit type complexes and close to ground level habitation. We recommend a minimum distance of 300mm from the ground to the bottom of the rail when inhabiting a Kerdic Modular Tiny Home.  Please see the Transport & Installation page for more information.


Santa Fe





6 x 2.4m

6 x 3.4m

12 x 2.4m

12 x 3.4m





















Kerdic Tiny Home Standard/Normal Priced –Inclusions Guide 16/12/2019

Kerdic reserves the right to change this inclusions guide without notice.


  • New, purpose-built high cube containers.
  • Heavy duty corrugated external steel container, standard crane caster lifting points for shipping.
  • Corrosion and weather resistant corrugated high strength steel (commonly known as Cor-Ten steel).
  • Heavy gauge steel floor joists & bearers.
  • Heavy gauge steel corner posts for bracing and loading capacity.
  • Pressed steel seam welded roofing panels.
  • Inbuilt gutters.
  • Inside Galvanised steel frames against the outer walls and galvanised framed internal walls.
  • 12mm plasterboard (Drywall) fixed to ceiling battens installed throughout including shadow line for architectural merit. Excludes bathroom ceilings.

External Finishes

  • The outer modular carcass walls, roof and floor joists are painted in long life weatherproof paint.
  • Double glazed tempered glass (5mm) to aluminium framed windows and glass sliding doors.
  • Keyed locks to all external doors.
  • Protective Plywood to glass windows and doors for shipping and transportation.


  • Thick layer of closed cell polyurethane insulation sprayed onto the inside walls and ceilings of the bare steel modular carcass.
  • Specialised layered sheet of vapour control silver sisalation  insulation between the spray-on polyurethane and the adjacent internal steel stud, nogging framed walls and the top of the internal ceiling frame (except NZ )
  • Rockwool or fiberglass insulation in all inside Galvanised steel frames against the outer walls and galvanised framed internal walls

Internal Fit-Out

  • Compressed FC flooring glued and screw fixed to steel floor joists.
  • Vinyl planking floating floor (excluding wet areas).
  • 12mm plasterboard (Drywall) lined walls throughout excluding wet areas.
  • 3 coats of premium paint applied to internal walls.
  • Fibre cement lined walls to bathrooms.
  • 12mm plasterboard (Drywall) fixed to ceiling battens installed throughout including shadow line for architectural merit. Excludes bathroom ceilings.
  • European Beech 68mm x 12mm architraves and skirting throughout (excluding wet areas) and to jamb-sets for door openings where applicable.
  • Flush panel timber veneer internal doors are painted.
  • Architectural Lever Series internal door furniture.
  • 2-pak painted doors to robes, linen cupboards and laundry where applicable.
  • Custom robe fit out including a bank of shelves, 3 drawers and top shelf with hanging rails.
  • Built in overhead and side cupboards in nominated bedrooms as per plan.
  • Custom built 2pac combination robe with 3 drawers, desk & overhead cupboards with LED lighting where applicable to design.


  • Nova Deko square edged reconstituted quartz stone bench tops.
  • Nova Deko gloss 2-pac finish to kitchen cupboard fronts including metal cabinetry handles where applicable.
  • Cupboard doors are secured by tape for transport.
  • Four drawer cutlery unit including Blum soft closing drawer runners.
  • Feature single bowl kitchen sink.
  • Ceramic tiled kitchen splashback, 600mm high to applicable designs.
  • Provision for dishwasher including cold water and electrical connection points.
  • Kitchen appliances (cooktop, oven and rangehood).
  • Hot water system (instantaneous single phase 40 amp).



  • Underslung drainage within the confines of the bottom main container rails, water entry and waste exit via the side of the outside container rail.
  • Complete with sink, toilet, floor wastes, vanity, basin, taps and shower.
  • Polyethylene pressure piping.
  • 600mm blade screen or curtain to shower recess, as appropriate.
  • Ceramic tiles to 1200mm high on walls and to 2100mm high in shower recess.
  • Ceramic tiles to shower floor, fully waterproofed.


  • Nova Deko Premium Series basin mixers where applicable.
  • Nova Deko Premium Series wall mixer to shower recess where applicable.
  • Nova Deko Premium Series kitchen mixer.
  • Nova Deko Premium Series ¼ turn washing machine cocks.
  • Nova Deko Premium Series ¼ turn cistern cocks to W/C’s.
  • Nova Deko Premium Series shower rose on rail combo.


  • Wiring Certification- Australian Standards and New Zealand Standards for cabling and Electrical fittings.
  • One recessed LED light per room; double power outlets in each room, two in kitchen; phone, data and TV points to living area and main bedroom, as per electrical plan.
  • internal switchboard /high quality switch gear/safety switch on each circuit
  • 20A Isolator switches installed for airconditioning circuits
  • Electrical main supply cable and main earth folded underneath container for connection.
  • Smoke alarms are all photoelectric type. One smoke alarm per bedroom and one in the main central area. These are positioned appropriately in flow areas. All smoke alarms are connected to the mains electricity supply with battery backup and are all interconnected.
  • Ceiling fans

Items Not Supplied

  • External electricity meter box (included with Kerdic Install)
  • External light fittings (included with Kerdic Install)
  • Sun shading, awnings, security screens
  • Window furnishings (Bal 40 fire rating screens available as an option)
  • TV antenna
  • External cladding (option)
  • Dishwasher (option)